Hi All,
We are having a master controller of IP address 192.168.10.6 . Right now all the AP's are terminated here in master controller and got provisioned. There is no sepearte local controller.
As a requirement , we are going to add one more backup master controller and we are going to run VRRP between this.
So we want to change the ip addresses as below ,
Master controller: 192.168.10.6 (sepearte physical ip)
secondary controller: 192.168.10.5(sepeate physical ip)
VRRP IP : 192.168.10.7
We will be chaging the option 43 with new Virtual ip address of controller and AP will get the information about the same.
My doubt is that , AP's are already provisioned and associated. If we change the master controller ip address whether the AP will be able to register properly or do we need to purge all the settings in the AP level? we are having 200 Ap's already associated with controller.
Kindly clarify.