Wireless Access

Reply
Contributor I
Posts: 26
Registered: ‎09-17-2012

Channel bonding at 5Ghz

[ Edited ]

Hello,

 

I'm trying to setup channel bonding at 5GHz. Which value sholud be written in the field as shown on attached image?

 

Channel bonding.JPG

Guru Elite
Posts: 20,760
Registered: ‎03-29-2007

Re: Channel bonding at 5Ghz

Do not touch that field.  

 

In the Adaptive Radio Management profile, by default channel bonding is enabled.  The parameter that controls that is "Allowed bands for 40MHz channels".  Set it to "a-only" for 40 mhz channel bonding.  For 80mhz channels, just enable the "80mhz channel" checkbox in addition.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 26
Registered: ‎09-17-2012

Re: Channel bonding at 5Ghz

Thanks CJoseph!

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: