Hello,
We have a controller based Campus WLAN net, and under Configuration AP Group, Profile, Regulatory Domain the chosen 802.11g channels are 1, 6 and 11 (as recommended in several articles here). The country code is correctly set.
In several buildings where we have dense AP placements there are complaints from users of connections dropping off, or poor connections. In the Aruba dashboard we are seeing the quality of the 2.4 GHz band being rated as poor, with channels 1,5,7 and 11 channels being utilised. Apparently these are overlapping channels, despite having chosen the non-overlapping channels in the configuration.
See the attached screen shots.
Where could I be going wrong? Is there possibly another configuration setting that I need to adjust?
I would be grateful for any suggestions.
Thank you in anticipation.
Regards Peter