Wireless Access

Reply
Occasional Contributor I

Client Aware

Where would I see if client aware is disabled or enabled in cli

Contributor I

RE: Client Aware

 

(Aruba3200) #show rf arm-profile default
Adaptive Radio Management (ARM) profile "default" undefined.

(Aruba3200) #show rf arm-profile default-a

Adaptive Radio Management (ARM) profile "default-a" (Predefined (changed))
--------------------------------------------------------------------------
Parameter Value
--------- -----
Assignment single-band
Allowed bands for 40MHz channels a-only
80MHz support Enabled
Client Aware Enabled
Max Tx EIRP 18 dBm
Min Tx EIRP 12 dBm
Rogue AP Aware Disabled
Scan Interval 10 sec
Aggressive scanning true
Active Scan Disabled
ARM Over the Air Updates Enabled
Scanning Enabled
Multi Band Scan Enabled
VoIP Aware Scan Enabled
Power Save Aware Scan Disabled
Video Aware Scan Enabled
Ideal Coverage Index 10
Acceptable Coverage Index 4

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: