Wireless Access

Reply
Occasional Contributor II

Combined usage for AP 105

What is the highest this should be? I have seen cases where the combined usage for an AP never reaches 10 Mbps, and others where it reaches over 20 Mbps. I am just wondering at what point is the AP becoming overloaded? Thanks.

Frequent Contributor II

Re: Combined usage for AP 105

It depends on a lot of things. RF environment, number of clients on the AP etc...

10-20 Mbps doesn't sound too much. I measured 180-190 Mbps with iperf (AP-105).

Re: Combined usage for AP 105

Hi,

Please ,Read the following posts:

http://community.arubanetworks.com/t5/Access-Points-and-Mesh-Routers/Max-number-of-conccurent-users-AP/td-p/12567

http://community.arubanetworks.com/t5/Access-Points-and-Mesh-Routers/How-many-users-can-to-support-the-AP105-with-a-good-service/td-p/21654

http://community.arubanetworks.com/t5/Access-Points-and-Mesh-Routers/ap-105-maximum-clients/td-p/65108

 

http://community.arubanetworks.com/t5/Access-Points/802-11n-40MHz-benefits-on-different-radios/td-p/6313

 

Hope all those posts - will give u the idea,I like the AP-105 very much , it's a cost effective unit - and you should get better results then what you wrote.

 

have a lovely evening.:smileywink:

 

me

 

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: