Wireless Access

Reply
Frequent Contributor II
Posts: 106
Registered: ‎04-15-2013

Community String

Where would I find the Community String on my 620 controller.  I have a phone system that is asking for it.

 

 

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Community String

From the CLI.  If it's not in there, then set it using the command shown as well below:

 

(3200) #show running-config | include comm
Building Configuration...
snmp-server community "public"

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: Community String

You can define it on Configuration --> SNMP (on the left under Management).   A new install has no string.

 

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Search Airheads
Showing results for 
Search instead for 
Did you mean: