@rgodin wrote:
I have the same output for all the AP.
I read on Aruba documentation, I have the option for the controller to select the best radio profile (a or g) dynamically and this is a option I have to select. Can you tell me where is this option?
To be clear, the problem could be is that the power is too high on the access points, so they all seem attractive to the client. The access points are possibly at or near max power, base on your output. The solution is to turn the ARM MAX TX power down to 18 and arm MIN TX power to 12 and see if things improve. That is the only thing that you should change at this time.