Wireless Access

Reply
Aruba
Posts: 1,290
Registered: ‎08-29-2007

Configure AP for dhcp using console cable

Hi,

 

What is the setenv command to set an ap to get an address via dhcp?

 

I have some RAPs used for surveying (with static ip) and need to reprovision them to different ap-group from a hotel.  They are currently setup with static ip, so need them to boot up and get dhcp, and then hopefully they can reach the controller.

 

Thanks


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Aruba
Posts: 1,290
Registered: ‎08-29-2007

Re: Configure AP for dhcp using console cable

Think I found it. Either,

 

setenv dhcp

or

dhcp

 

:smileyhappy:


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Aruba Employee
Posts: 77
Registered: ‎04-11-2007

Re: Configure AP for dhcp using console cable

you do need the set command before dhcp. It can be 

 

set dhcp

or

setenv dhcp

Search Airheads
Showing results for 
Search instead for 
Did you mean: