Wireless Access

Reply
Frequent Contributor II
Posts: 104
Registered: ‎02-25-2011

Configure static IP detials on RAP5 ?

Hi,

 

I'm looking to deploy a RAP5 to a small office but we are only able to obtain fixed IP addresses from the building owner providing the Internet connectivity.   I've only ever provisioned a RAP5 when it's obtainied it's IP details via DHCP.

 

Is it possible to statically configure the IP detials on the RAP so that it can get to the Internet to build it's tunnel

 

Note that I need to use the RAP in the traditional method, not in Instant mode.

 

thanks

 

Lee

Guru Elite
Posts: 21,561
Registered: ‎03-29-2007

Re: Configure static IP detials on RAP5 ?

Yes.

 

You need to make sure that the "Zero Touch Provisioning" image is 5.x or above.  You should see a "Static IP" tab:  http://community.arubanetworks.com/aruba/attachments/aruba/88/241/4/Figure1.jpg

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor II
Posts: 104
Registered: ‎02-25-2011

Re: Configure static IP detials on RAP5 ?

Excellent ! 

 

Thanks very much

 

Lee

Search Airheads
Showing results for 
Search instead for 
Did you mean: