I'm playing with Aruba OS 8.X in the lab.
I've succesfully configured a Mobility Master, but I'm having issues creating a cluster of Mobility Controllers.
I'm trying to follow the example on the Aruba Solutions Exchange, but my controllers keep reporting that they are L3 connected.
I would also like to setup a VRRP between the controllers in the cluster.
Here is a dwg:
Here are the commands I tried to use:
no paging
#Group-level configuration
cd /md/ns-lab/cluster-nh
configure terminal
lc-cluster group-profile cluster-nh
write memory
cd /md/ns-lab/cluster-nh/00:1a:1e:00:da:90
lc-cluster group-membership cluster-nh
write memory
/md/ns-lab/cluster-nh/00:1a:1e:00:90:40
lc-cluster group-membership cluster-nh
write memory
#Group-level configure
cd /md/ns-lab/cluster-nh
lc-cluster group-profile cluster-nh
controller 172.30.97.10
controller 172.30.97.11
redundancy
write memory
However I get the following error:
(mm-nh-p) [md] #logon 172.30.97.10
Last login: Mon Feb 13 09:49:05 2017 from 128.255.204.94
(ctrl-nh-1) [MDC] *#show lc-cluster group-membership
Cluster Enabled, Profile Name = "nh-cluster"
Redundancy Mode On
Active Client Rebalance Threshold = 50%
Standby Client Rebalance Threshold = 75%
Unbalance Threshold = 5%
Cluster Info Table
------------------
Type IPv4 Address Priority Connection-Type STATUS
---- --------------- -------- --------------- ------
self 172.30.97.10 150 N/A CONNECTED (Leader)
peer 172.30.97.11 100 L3-Connected CONNECTED (Member, last HBT_RSP 39ms ago, RTD = 0.260 ms)
(ctrl-nh-1) [MDC] *#
Also If I try to configure a VRRP IP I get
lc-cluster group-profile nh-cluster
(mm-nh-p) [cluster-nh] (Classic Controller Cluster Profile "nh-cluster") #controller 172.30.97.10 priority 150 vrrp-ip 172.30.97.18 vrrp-vlan 376
(mm-nh-p) [cluster-nh] (Classic Controller Cluster Profile "nh-cluster") #controller 172.30.97.11 priority 100 vrrp-ip 172.30.97.18 vrrp-vlan 376
Error: vrrp-ip 172.30.97.18 matches with vrrp-ip for controller ip 172.30.97.10
This seems like this should work. Also, after I perform the configuration if I try to show the configuration profile I get:
(mm-nh-p) [cluster-nh] #show lc-cluster group-profile nh-cluster
Classic Controller Cluster Profile "nh-cluster" undefined.
(mm-nh-p) [cluster-nh] #
Any help would be appreciated.
Thanks
-Neil