Wireless Access

What type of condition i have to select here ?

there are many options related to the condition and what is the purpose of all individual ones ? What is the purpose of after selecting individuals ?

Contians =

Ends-with =

Equals =

Not Equal =

Starts-with =

Thanks dear Sriram...

Find a solution

The conditions are really just what they says

Contians =

The string from the rule type CONTAINS the value entered for example: 

BSSID = d8:c7:c8:11:22:33

Value = c7:c8

This would be a hit

Ends-with =

The string from the rule type ENDS WITH the value entered for example: 

BSSID = d8:c7:c8:11:22:33

Value = 22:33

This would be a hit

Equals =

The string from the rule type EQUALS the value entered for example: 

BSSID = d8:c7:c8:11:22:33

Value = d8:c7:c8:11:22:33

This would be a hit

Not Equal =

The string from the rule type DOES NOT EQUAL the value entered for example: 

BSSID = d8:c7:c8:11:22:33

Value = 11:22:33:44:55:66

This would be a hit

Starts-with =

The string from the rule type CONTAINS the value entered for example: 

BSSID = d8:c7:c8:11:22:33

Value = d8:c7

This would be a hit

Hope this clarifies this for you :)

Dear Nesvik..

Hatts Off to you... Wat a brilliant knowledge you given to me which i want with this way.

Outstanding !!!! :smileyhappy:

According to your Answer as below

The conditions are really just what they says

Contians =

The string from the rule type CONTAINS the value entered for example: 

BSSID = d8:c7:c8:11:22:33  ( Here, how can i write the mac address of the AP . After Selecting the BSSID there is no option to enter the mac address , just to enter the value in the next step after selecting BSSID).

Value = c7:c8

This would be a hit

One thing i want to understand, after selecting the "role"  then "BSSID"  then in the " value" portion whether we have to enter the MAC-address of the AP or something else... Too much confuse... kindly help me in this regard.

You would enter the MAC address of the AP in the Value field.

"Contition BSSID" would be the variable that are checked against the "value" field.

So in plain english this would be something like:  

"Check what the currently connected BSSID (Condition BSSID) is and compare it to what I want it to Contain (Value field).

You Cannot set the Contition Field as it is dynamicaly set to the BSSID if whatever AP the user is currently connected to :)