Wireless Access

Reply
Contributor I

Connecting a local controller

Gentlemen,

 

I am doing my first Aruba installation, which is to install a local controller whose master is in another country.

 

I have completed a test run using the in-built wizards and it appears to only be around six screens of configuration to get the basics completed.

 

Once the local controller is configured and communicating with the master control what should I see/experience?   I couldn't find any documentation on this.

 

Are their any traps to avoid or additional configuration that should be completed to comply with best practice?

 

 

 

Crowdie

Guru Elite

Re: Connecting a local controller

Please see the Aruba Campus WLAN VRD here:  http://www.arubanetworks.com/pdf/technology/VRD_Campus_Networks.pdf

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: