Wireless Access

Reply
Occasional Contributor I
Posts: 7
Registered: ‎03-22-2016

Content Length Exceed Limit

Hi all,

 

I am trying to upgrade Aruba 650 from ArubaOS 6.1.3.7 to ArubaOS 6.4.3.7 via WebUI. 

But I received the error "Content Length Exceed Limit".

 

The problem is that the size of the image is 72Mb and the size of nonboot partition /dev/mtdblock9 is only 50Mb.

Is it possible somehow to extend partition /dev/mtdblock9 or to upgrade from external storage?

 

(Aruba650) (config) #show storage
Filesystem          Size      Used   Available Use%  Mounted on
/dev/mtdblock11 156.0M 62.5M 93.5M      40%    /flash
none                   300.0M 3.0M   297.0M    1%      /tmp
/dev/mtdblock9   50.0M   24.8M 25.3M      50%    /mnt/img0
/dev/mtdblock10 50.0M   24.5M 25.5M      49%    /mnt/img1

 

(Aruba650) (config) #show image version
----------------------------------
Partition :                   0:0 (/dev/mtdblock9)
Software Version :     ArubaOS 6.1.3.5 (Digitally Signed - Production Build)
Build number :           35523
Label :                       35523
Built on :                    Fri Sep 28 07:46:05 PDT 2012
----------------------------------
Partition : 0:1 (/dev/mtdblock10) **Default boot**
Software Version :     ArubaOS 6.1.3.7 (Digitally Signed - Production Build)
Build number :           37112
Label :                       37112
Built on :                    Fri Feb 8 18:08:20 PST 2013 

 

Thank You

Best regards,

Nadiia Kotelnikova

Guru Elite
Posts: 20,960
Registered: ‎03-29-2007

Re: Content Length Exceed Limit

[ Edited ]
The problem is that the 650 has limited memory. Go to Maintenence> Files and delete as many files as possible (except your startup config) to see if you can free up enough room.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 7
Registered: ‎03-22-2016

Re: Content Length Exceed Limit

Thank You for helping me! Everithing working correct!

1) I deleted all files except default.cfg.

2) Copied image via tftp:

(hostname)# copy tftp: <tftphost> <image filename> system: partition <0|1>

3) Rebooted the controller:
(hostname)# reload

Search Airheads
Showing results for 
Search instead for 
Did you mean: