11-02-2011 01:42 PM
Like I said, I don't want to mess up my existing plans, but reimporting each floor plan and redrawing all the exterior walls for all the buildings I want to do this with would take forever. Is there a simple/quick way of doing this?
Solved! Go to Solution.
11-03-2011 07:22 AM
Ryan Holland, ACDX #1 ACMX #1
The Ohio State University
11-17-2011 10:09 AM
If you're doing planning instead of using real APs - you can use the VisualRF standalone planning tool. You can use Ryan's method for exporting and importing. The standalone tool works from a window's machine and helps create a predictive image of what deployments will looke like.
Alternatively, if you want to do this all from the same AMP: create a new campus and building for your test view. Then go to the actual building, and duplicate the floor plan. Once duplicated, you can edit that floor plan and move it to the test building. From there you can run the same types of planning mock ups as you would with the VisualRF standalone tool.
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company