08-29-2013 04:09 PM
Hi all, I was wondering if someone can point me in the direction of documentation that shows how to convert an AP-135 from an AP to a Remote AP.
We have a site that has poor wireless coverage, and thought a good way to solve it for them is to covert the 135 in to a remote ap if possible (whitepapers mentions it). We have other RAP-3WNPs, but they are currently deployed elsewhere.
Any help would be greatly appreciated.
Solved! Go to Solution.
08-29-2013 04:11 PM
This document gives step-by-step instructions on how to use an AP as a RAP.
08-30-2013 05:16 AM
Assuming you already have your RAP groups and profiles set.
- Add the MAC to your RAP whitelist and choose the appropriate AP Group
- Provision the AP-135 like you normally would
- Select Remote AP=Yes
- Remote AP Authentication Method=Certificate
- Master Discovery, Master Controller IP/DNS Name=your RAP provisioning IP/Name
- Apply Reboot
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX