Wireless Access

Reply
Occasional Contributor I
Posts: 9
Registered: ‎10-12-2012

Crypto pki-import fail / WebUI not working

Hi , I'm trying to apply openssl cert using CLi to wlc running 6.2.1.4.
Crypto pki-import pem servercert wlc1 sert.pem "password"
Result : Error, out of space
Sh mem : tot 659204, used 412248, free 246596
At the same tume controller WebUI doesn't work. Login page opens but after that blank screen. HTTPD process has been restarted but no go.
Br
Juha-Pekka
Guru Elite
Posts: 21,487
Registered: ‎03-29-2007

Re: Crypto pki-import fail / WebUI not working

How did you end up in this situation?  What broke the WebUI?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite
Posts: 21,487
Registered: ‎03-29-2007

Re: Crypto pki-import fail / WebUI not working

Okay, if the GUI is broken, you can revert to the built-in certificate by doing this:

(Aruba7005-US) #restore ?
factory_default         factory default setting
flash                   untar and uncompress to restore the flash's 
                        important directories from flashbackup.tar.gz

(Aruba7005-US) #restore factory_default ?
certificate             Revert the current default certificate to factory 
                        default certificate

(Aruba7005-US) #restore factory_default certificate ?
<cr>

 

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 9
Registered: ‎10-12-2012

Re: Crypto pki-import fail / WebUI not working

Done,

(WLC-1) #show crypto-local pki ServerCert

Certificates
------------
Name            Original Filename  Reference Count  Expired
--------------  -----------------  ---------------  -------

(WLC-1) #

HTTPD restarts itself, but WebUI still not opening
Login window opens fine, and login is fine, but then Blank screen
This problem remains
(WLC-1) #crypto pki-import pem ServerCert wlc-1 wlc_self_cert.pem "password"
Error, out of space

I've asked service window to boot WLC or do You have other proposals?

Br

Juha-Pekka

Guru Elite
Posts: 21,487
Registered: ‎03-29-2007

Re: Crypto pki-import fail / WebUI not working

Try clearing your browser cache or use another browser.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 9
Registered: ‎10-12-2012

Re: Crypto pki-import fail / WebUI not working

Sure, I always start browser after httpd restart (close it)

Firefox Winfows machine + Safari MAC, no go
TAB Shows : Monitoring but no go, blank screen

 

Juha-Pekka

Occasional Contributor I
Posts: 9
Registered: ‎10-12-2012

Re: Crypto pki-import fail / WebUI not working

Safari gives more information

Guru Elite
Posts: 21,487
Registered: ‎03-29-2007

Re: Crypto pki-import fail / WebUI not working

I have not seen that before.  You might want to open a TAC case, or schedule a maintenence window to reboot.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 9
Registered: ‎10-12-2012

Re: Crypto pki-import fail / WebUI not working

Thanks. Reboot first step
Br
Juha-Pekka
Search Airheads
Showing results for 
Search instead for 
Did you mean: