Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎06-12-2013

DHCP HELPER NOT WORKING

HI , 

  I have my controller on vlan 100 connected directly to office core switch, DHCP server is connected to site office core switch. MPLS connectivity is there between core switches. We are able to reach from controller to dhcp server. vlan 10 has been configured on controller, assigned a ipaddress on vlan 10 and dhcp helper is configured. Clients are not able to get ipaddress:( 

 

 

 

New Contributor
Posts: 3
Registered: ‎06-12-2013

INTERNAL DHCP SERVER FOR PARTICULAR VLAN

HI, 

 i have configured dhcp server on aruba, it releases ipaddress for different vlan randomly. how can we specify different dhcp scope for specific vlan. 

MVP
Posts: 4,225
Registered: ‎07-20-2011

Re: INTERNAL DHCP SERVER FOR PARTICULAR VLAN

[ Edited ]

 

 

Do the following  :

 

- create a Layer2 VLAN : VLAN 10

- then create an SVI

 interface vlan 10  

ip address 10.10.10.1 255.255.255.0

- Apply this VLAN 10 under the Virtual AP 

 

ip dhcp pool TEST-DHCP-POOL1
default-router 10.10.10.1
dns-server 8.8.8.8
lease 0 1 0 0
network 10.10.10.0 255.255.255.0

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor
Posts: 3
Registered: ‎06-12-2013

Re: INTERNAL DHCP SERVER FOR PARTICULAR VLAN

hi victor, 

    thanks for your reply, i tried it.. where can we add the specific route for vlan. 

Super Contributor II
Posts: 354
Registered: ‎09-26-2012

Re: INTERNAL DHCP SERVER FOR PARTICULAR VLAN

What do you mean by specific route for VLAN ? you can configure destination based routing under configuration and IP route tab.
Thanks & Regards
Syed Murad Ali
ACMP ACMA CCNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: