Wireless Access

Reply
New Contributor

Device behind TP-Link WR810N gets no IP

Hello together,

 

I hope you can help me. I have an TP-Link WR810N connected in Client mode. That means the TP-Link Device connects to the wirelees and on the TP-Link device I have the opportunity to connect two divices via cable. I see the TP-Link WR810N  in our wireless network connected but the wired devices behind the TP-Link gets no IP address

 

My first idea was that the broadcast filtering cause this issue. But on the virtual AP is nor filtering enabled. You can see it in the attachment.

 

I use a 7210 controller with AOS 6.4.3.7 and AP-105

 

Thanks for your support

 

Best Regards Torben

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: