Wireless Access

Hi

anyone know where I can disable the speeds 1, 2 and 5.5 mbps in the 2.4 Ghz frequency in my controller

regards

Alex.

 

You can go under the wlan ssid-profile and select the rates you want enable under that ssid 

 

(controller) (SSID Profile "TEST-SSID-PROFILE-B") # g-tx-rates ?

1 1 Mbps
11 11 Mbps
12 12 Mbps
18 18 Mbps
2 2 Mbps
24 24 Mbps
36 36 Mbps
48 48 Mbps
5 5 Mbps
54 54 Mbps
6 6 Mbps
9 9 Mbps

 

 

You can do it from the GUI : Configuration > All Profiles > SSID > SSID Profile

 

Thanks Victor

I don't know if you can help me I want to reduce the coverage area of many of my ap's I thought that just disabling the speeds of 1, 2 and 5 was enough

regards

Alex

You can do this under the rf arm profile , you can lower the power.

Before you make this make sure you do a survey , making this change can impact the coverage in other areas

You can make this changes here : AP-Group >RF management >802.11 (a or g) radio profile > arm profile

Hi Victor

What is the part that I have to change Acceptable Coverage Index or Ideal Coverage Index ? Could you recommend values ?

regards

Alex

You should probably read this doc it will help determine what changes based on the type deployment you have : amount of APs , building structure , etc...
http://www.arubanetworks.com/wp-content/uploads/802_11nVRDV8_20110913.pdf

Thanks Victor