Wireless Access

Reply
Contributor I
Posts: 24
Registered: ‎07-29-2010

Disable_speeds

Hi

anyone know where I can disable the speeds 1, 2 and 5.5 mbps in the 2.4 Ghz frequency in my controller

regards

Alex.

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: Disable_speeds

[ Edited ]

 

You can go under the wlan ssid-profile and select the rates you want enable under that ssid 

 

(controller) (SSID Profile "TEST-SSID-PROFILE-B") # g-tx-rates ?

1 1 Mbps
11 11 Mbps
12 12 Mbps
18 18 Mbps
2 2 Mbps
24 24 Mbps
36 36 Mbps
48 48 Mbps
5 5 Mbps
54 54 Mbps
6 6 Mbps
9 9 Mbps

 

 

You can do it from the GUI : Configuration > All Profiles > SSID > SSID Profile

 

Screen Shot 2013-04-11 at 9.31.14 PM.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I
Posts: 24
Registered: ‎07-29-2010

Re: Disable_speeds

Thanks Victor

I don't know if you can help me I want to reduce the coverage area of many of my ap's I thought that just disabling the speeds of 1, 2 and 5 was enough

regards

Alex

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: Disable_speeds

You can do this under the rf arm profile , you can lower the power.

Before you make this make sure you do a survey , making this change can impact the coverage in other areas
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: Disable_speeds

You can make this changes here : AP-Group >RF management >802.11 (a or g) radio profile > arm profile
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I
Posts: 24
Registered: ‎07-29-2010

Re: Disable_speeds

Hi Victor

What is the part that I have to change Acceptable Coverage Index or Ideal Coverage Index ? Could you recommend values ?

regards

Alex

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: Disable_speeds


You should probably read this doc it will help determine what changes based on the type deployment you have : amount of APs , building structure , etc...
http://www.arubanetworks.com/wp-content/uploads/802_11nVRDV8_20110913.pdf
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor I
Posts: 24
Registered: ‎07-29-2010

Re: Disable_speeds

Thanks Victor

Search Airheads
Showing results for 
Search instead for 
Did you mean: