Wireless Access

Reply
Occasional Contributor II

Enabling routing in OmniAccess 4306G

Hi Guys,

 

How to enable routing in OmniAccess 4306G?

Is it via interface vlan only or global as well? Thanks

Re: Enabling routing in OmniAccess 4306G

By default, any VLAN you create intervlan routing is enabled.  show interface vlan <id> should give the  status about if Routing is enabeld on that VLAN. 

 

Inter VLAN routing is not going to work until explicitly you provide "no routing" from the VLAN interface which can be viewed by "show running-config"

 

Thx,

Sriram

 

Occasional Contributor II

Re: Enabling routing in OmniAccess 4306G

Hi Sriram,

 

I disable ip routing on all vlan interface but inter vlan routing still not working.

Anything I still havent done? Thanks

Re: Enabling routing in OmniAccess 4306G

You need to enable ip routing for Inter VLAN routing to work.

 

Configure terminal

Interface vlan <id>

ip routing

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: