Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Epson printer

This thread has been viewed 4 times

  • 1.  Epson printer

    Posted Dec 07, 2012 08:58 AM

    We are having problems connecting to our Epson projectors on our network.

     

    They are connecting to our wireless, but the easymp utility cannot connect/find the projectors. We cannot ping those computers

     

    Last year under a slightly different profile design, we were able to connect but this year we cannot... actually we can connect to one model, but none of the older models. For example a powerlite 1705c does not connect.

     

    Has any experienced similiar issues?



  • 2.  RE: Epson printer

    Posted Dec 08, 2012 07:09 AM

    do you know what protocol the program uses to find the printers on the network?



  • 3.  RE: Epson printer

    EMPLOYEE
    Posted Dec 08, 2012 09:10 AM

    Excellent question...



  • 4.  RE: Epson printer

    Posted Dec 10, 2012 07:53 AM

    Sadly no.



  • 5.  RE: Epson printer

    Posted Dec 10, 2012 12:47 PM

    you could give wireshark a try, though with wireless that might be tricky. still worth the effort, specially with the device that does work.



  • 6.  RE: Epson printer

    Posted Sep 09, 2016 12:11 PM

    Disabling broadcast control for the IAP network made this work for us, but we did not leave it that way (poor practice!).   My packet capture (from 2016) did not show any multicast used for discovery, only broadcast.   So, customer is stuck with having to enter the projector IP address manually into EasyMP software to begin projection.