Wireless Access

Reply

Error while configuring Master Redundancy

I'm trying to configure a pair of controllers for Master Redundancy using VRRP.  Every time I to enter the Master-redundancy configuration on one of the controllers, I get this error:


Error processing the command: Error: Master IP 192.168.50.75 is configured

 

That IP address was the one I gave the controller when I was originally preping it for implementation off site, but it has since been purged from the configuration entirely.  I can find it nowhere in the configuation at all yet the controller seems to think it is still there.

 

Any help is appreciated.

 

Thanks

 

Bill

 

 

 

Contributor I

Re: Error while configuring Master Redundancy

Hi Bill,

 

Will you be able to share the config file.

Re: Error while configuring Master Redundancy

Current Running config attached

Re: Error while configuring Master Redundancy

A software upgrade to 6.4.4.15 and reboot of the controller fixed the issue.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: