Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎04-15-2014

Extract RSSI values off of AP's

Essentially; I would like to grab a set of credentials for AP's that are around and strip that information to obtain RSSI values belonging to each specific AP.

 

Has anyone written any script that has a similar functionality to what I've described above?


Thanks!

 

Jordan

Super Contributor II
Posts: 1,124
Registered: ‎07-13-2010

Re: Extract RSSI values off of AP's

Hi awjordan. Please do not create multiple threads on the community on the same topic. Feel free to DM me and I can connect you with some internal guys if the community is not able to answer.

So you want to know how well each AP hears other APs? Sounds doable. Do you have a list of AP names? You dont need to attach it here but you will need them in the future.

Try these:

show ap arm neighbors ap-name "APsName"

show ap arm rf-summary ap-name "APsName"
Sean Rynearson | Chief Airhead
Aruba, a Hewlett Packard Enterprise Company
Aruba
Posts: 233
Registered: ‎11-19-2009

Re: Extract RSSI values off of AP's

show ap monitor ap-list ap-name <name of the ap>  & show ap arm state ap-name <name of the ap> will give you exactly the RSSI and SNR values of neighboring AP`s.

 

Thank you.

Super Contributor II
Posts: 1,124
Registered: ‎07-13-2010

Re: Extract RSSI values off of AP's

Great Command Sriram!

show ap monitor ap-list ap-name (Name of AP)

 

Screen Shot 2014-04-17 at 4.44.53 PM.png

 

Sean Rynearson | Chief Airhead
Aruba, a Hewlett Packard Enterprise Company
Occasional Contributor I
Posts: 7
Registered: ‎04-06-2014

Re: Extract RSSI values off of AP's

Hi guys,

 

I have been trying to do something similar. I have two questions:

 

1. Is there a command to show the groups of AP monitors?

 

2.Does the on_controllers command work with the commands you gave Jordan? Ex:

 

#on_controllers show ap monitor ap-list ap-name <aPotentialMonitoringAPname; i.e, AP-155:8f:5c:00> email@gmail.com

Aruba
Posts: 233
Registered: ‎11-19-2009

Re: Extract RSSI values off of AP's

yes.

 

show ap active air-monitor should gives the list of all Air-monitors on the controller.

show ap monitor ap-list ap-name <name of the command should work.

 

thank you.

New Contributor
Posts: 3
Registered: ‎04-15-2014

Re: Extract RSSI values off of AP's

Thanks Sriram,

 

Just a quick follow-up question:

 

How can I execute a for loop to go with your commands? Is there a specific one that Aruba uses?

 

 

New Contributor
Posts: 3
Registered: ‎05-10-2017

Re: Extract RSSI values off of AP's

Hi,

what command should I use to extract the MAC address and rssi of the clients, not the BSSID o other APs.

Search Airheads
Showing results for 
Search instead for 
Did you mean: