Wireless Access

Reply
Frequent Contributor I

Failed to Provision Mesh Point

I have configured  mesh setup.I managed to provision 1 AP-175 as Mesh Portal but when provision another AP-175 as Mesh Point, that AP stated down and getting ‘’asap_vap_gone:Got vap gone notification on unknown vap:0:0” and “asap_vap_gone:Got vap gone notification on unknown vap:0:1” error at AP console. When I use back this AP and provision it as normal AP and Mesh Portal that AP manage to provision and UP

Guru Elite

Re: Failed to Provision Mesh Point

Do you already have a mesh configuration in that ap-group?  Those messages on the console, by themselves, are inconclusive..



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: Failed to Provision Mesh Point

Are you powering up the mesh point on the same L2 switch as the mesh portal? If so, you cannot do that as it will create a loop. Also, those messages are innocuous.

Jerrod Howard
Sr. Techical Marketing Engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: