Wireless Access

Reply
Regular Contributor I

Fast Failover 6.3

I've configured HA and FastFailover and it works great. However, does anyone know what the preemption hold-down timer is set to or where it can be configured?

Regards,

Josh
___________
ACMP, ACCP

Re: Fast Failover 6.3

The timer is in the ap system profile. Once the connection with the active controller comes back, the ap will wait for x seconds as defined here until it flips back.
Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Regular Contributor I

Re: Fast Failover 6.3

Do you know the exact setting in the AP profile? The only timer I see if the LMS Hold-down Period, which I wouldn't think would apply to 6.3 HA since the first thing you do is remove the backup LMS IP.

Regards,

Josh
___________
ACMP, ACCP

Re: Fast Failover 6.3

No. That timer does apply

Sent from my iPhone
Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: