Finding source of interference on

[jt-]

Hi 

I have 2 access point AP-105s that are showing a fair bit of interference on the 2.4Ghtz channel. I was wondering if there's a command that would allow me to see what SSID's and Channel that particular AP is seeing? Otherwise, I'll need to go to the remote location. I know in the webui Dashboard=>Security select an SSID and click the locate button and it should show what APs are seeing it. I'd like to do the reverse and query the AP to see what SSID's it see.

Is this possible?

Thanks

John

[cjoseph]

Where do you see that interference is present? Do you have screenshots?

[jt-]

Hi

Yes, It's only on the 2.4Ghz, I'm looking to see if it's an another AP. Thanks

[jt-]

That screen shot is taken from the controllers dash board=>Access Points=> The AP's radio.