Wireless Access

Reply
New Contributor

Forcing to specific channel after a radar event?

Hello,

is it possible to force the APs to move to specific channel or group of channels after a radar detection on Aruba OS 6.x? The goal is to make sure the new channel is always on UNI-1 range to avoid 1 minute silent period after the radar event.

Guru Elite

Re: Forcing to specific channel after a radar event?

The best way to do that is to avoid DFS entirely.

After the AP detects radar, all bets are off...


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

MVP

Re: Forcing to specific channel after a radar event?

Any recommendations for APs that turn themselves into APM due to radar? Got a bunch of those  :(

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: