Wireless Access

Reply
Contributor II
Posts: 71
Registered: ‎06-03-2014

GUEST WLAN CONFIG

I have a WLAN Controller OAW-4504 with firmware 6.3.1.7. I am trying to configure a guest wlan with captive portal authentication.

 

1. I used the normal condig wizard to create the guest wlan, but unfortunately the captive portal i configured does not work.

 

2. Secondly, i am not able to create/edit the user roles and policies. Do i need extra license to be able to do that?

 

 

Guru Elite
Posts: 8,467
Registered: ‎09-08-2010

Re: GUEST WLAN CONFIG

1) Do you have an IP address on the controller for the guest VLAN?

2) Do you have PEFNG licenses? They are required to utilize custom firewall policies.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II
Posts: 71
Registered: ‎06-03-2014

Re: GUEST WLAN CONFIG

thanks for the quick reply.

 

I have a normal OAW-AP-LAP license to support the APs. So does that mean without the other license, i cannot deploy a guest wlan which will be on a different vlan with just internet connection?

Contributor II
Posts: 71
Registered: ‎06-03-2014

Re: GUEST WLAN CONFIG

yes i have an IP address for the guest vlan. What can i do in my situation?

Guru Elite
Posts: 8,467
Registered: ‎09-08-2010

Re: GUEST WLAN CONFIG

You can deploy a guest WLAN, but you will need to use the default guest role.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II
Posts: 71
Registered: ‎06-03-2014

Re: GUEST WLAN CONFIG

okay. and can i use captive portal authentication as well with this default guest role?

 

Also, the default guest role shows not configured and there is no means to configure it. see attached screen shot

Search Airheads
Showing results for 
Search instead for 
Did you mean: