Wireless Access

Reply
Occasional Contributor I
Posts: 7
Registered: ‎02-20-2012

Generating a report to view multiple AP Network Usage

Hi folks,

I am using Welcome to AMP™ 7.3.5.

I am trying to generate a report to see network usage on multiple APs. However I dont know how to enter multiple MAC IDs in the Device Search Filter. Actually I dont know how to seperate those MAC IDs.

I tried ; then

I tried , then

I tried " SPACE"

 

I tried them all, they didnt work. Any idea how can I enter multiple AP MAC IDs.

Thanks in advance.

Regards,

Omer

Aruba Employee
Posts: 135
Registered: ‎06-18-2007

Re: Generating a report to view multiple AP Network Usage

Hi,

 

I think the best way to do this is to place the APs in a group and run the report on the Group (This is on AMP, not the controller).

 

-Mike

Occasional Contributor I
Posts: 7
Registered: ‎02-20-2012

Re: Generating a report to view multiple AP Network Usage

Hi Mike,

 

thank you so much. It is working..

 

best regars.

 

Omer

Regular Contributor I
Posts: 179
Registered: ‎04-15-2009

Re: Generating a report to view multiple AP Network Usage

[ Edited ]

You can also run a report on any set of APs or clients by clicking "Modify Devices" at the top of a list, selecting some devices, and then running a report (from the choice of actions at the bottom of the list). 

 

The search filter for reports is meant to be a single query just like the search box in the upper right side of the application. 

Search Airheads
Showing results for 
Search instead for 
Did you mean: