Wireless Access

Reply
Contributor II
Posts: 66
Registered: ‎01-25-2013

Going from 6.3.1.5 to 6.4.2.2

Hi,

 

i was just planning an upgrade to be able to use the AP-205's.  However i noticed the 6.4 firmwares were not yet in the general availability directory, but in the early deployment?

 

Am i compromising stability if i install the early deployment?

 

 

Guru Elite
Posts: 8,648
Registered: ‎09-08-2010

Re: Going from 6.3.1.5 to 6.4.2.2

I have quite a few large customers (including hospitals) running 6.4.2.2 without issue.

It will be GA shortly.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Frequent Contributor II
Posts: 110
Registered: ‎07-24-2014

Re: Going from 6.3.1.5 to 6.4.2.2

Does 6.4.2.2 support mesh with the AC access points?

Guru Elite
Posts: 8,648
Registered: ‎09-08-2010

Re: Going from 6.3.1.5 to 6.4.2.2

Mesh is not currently support on 802.11ac access points. 


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II
Posts: 66
Registered: ‎01-25-2013

Re: Going from 6.3.1.5 to 6.4.2.2

About one week after the upgrade...  No problems detected so far...

Search Airheads
Showing results for 
Search instead for 
Did you mean: