Wireless Access

Reply
cdj
Contributor I
Posts: 72
Registered: ‎07-17-2013

HA AP Fast Failover Issue

I'm having trouble configuring the ha-fast failover feature.

I have two 7220s running 6.4.2.4FIPS with VRRP & centralized licensing configured.

If someone can please look at my configuration below and see what's wrong:(note: not real ip addresses)

 

master ip address: 10.1.1.1

standby-master ip address: 10.1.1.2

VRRP ip address: 10.1.1.3

 

Master controller ha failover config:

Ha group-profile AP-Failover
controller 10.1.1.1 role dual
controller 10.1.1.2 role dual
state-sync
pre-shared-key password
exit
Ha group-membership AP-Failover

 

 

Standby-Master controller ha failover config:

Ha group-membership AP-Failover

 

Thanks. 

MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: HA AP Fast Failover Issue

Did you assigned the master IP address under the ap system profile > LMS-IP ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
cdj
Contributor I
Posts: 72
Registered: ‎07-17-2013

Re: HA AP Fast Failover Issue

No, I have the VIP configured as lms-ip under the ap system profile

MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: HA AP Fast Failover Issue

[ Edited ]
It should be pointing to the active controller not the VIP

The vrrp is to build the master redundancy not the AP redundancy that's why you adde the ip addresses of each controller in the group
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: