Wireless Access

Reply
New Contributor

[HELP] AMP report

Hi,  

Airwave version AMP™ 8.0.9.1

I have some question to use AMP report function

1, How to generate report data per AP

2, if it possible to generata the data every 5 minunte and send them to a FTP server?

 

Thank you very much in advanced!

 

Best regards

 

Rickard Sellstedt - IP-Only AB - www.ip-only.com
Guru Elite

Re: [HELP] AMP report

What kind of report do you need?  That will determine what you would do.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor

Re: [HELP] AMP report

 

Current report I got from AMP is a summary report including all the APs in a cluster, I would like to have a report ONLY for a specific AP.  Please guide. 

 

Thanks. 

 

Rickard Sellstedt - IP-Only AB - www.ip-only.com
Aruba Employee

Re: [HELP] AMP report

Hi Selric,

 

There are two ways you could run reports for a specific AP,

 

1. Go to AP/devices --> Click on Edit option for the devices list --> Select the AP for which you need to run the report, from device action select the option "run report for selected device"

 

AP.PNG

 

2. Go to reports --> Definitions --> Add new definition --> select the topic, under report restrictions --> device search filter, provide the specific AP MAC or Name.

 

AP.PNG

 

Regards,

Vishnu

Regards,
Vishnu
If my post helped you, don't forget to give kudos ;)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: