Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

High mswitch/bin/fpcli process cpu on 6000 controller

This thread has been viewed 0 times

  • 1.  High mswitch/bin/fpcli process cpu on 6000 controller

    Posted Feb 03, 2012 01:23 PM

    My 6000 local controller is experiencing a high cpu process rate on the mswitch/bin/fpcli process.  I don't understand what this process is or what it does so it's difficult to troubleshoot the issue.  Need Help!



  • 2.  RE: High mswitch/bin/fpcli process cpu on 6000 controller

    EMPLOYEE
    Posted Feb 03, 2012 01:33 PM

    Please open a support case, and do not attempt to troubleshoot.

     



  • 3.  RE: High mswitch/bin/fpcli process cpu on 6000 controller

    Posted Feb 03, 2012 02:29 PM

    I already did that and it doesn't seem to be getting me anywhere. That's why I was wanting to gain some understanding of the issue.  Even getting a definition of what this means would be helpful.



  • 4.  RE: High mswitch/bin/fpcli process cpu on 6000 controller

    EMPLOYEE
    Posted Feb 03, 2012 02:36 PM

    High Utilization on a process can be caused by anything, theoretically.  TAC has to find out why it is happening with you specifically.  The fpcli process having high utilization does not point to anything specifically.

     

    Are you having performance issues?