Wireless Access

Occasional Contributor II

How To Cunfigure Aruba with Radius server only

Hello i'm first time configuration Aruba Wireless.

my client have 80 AP (AP-205 and AP 215) with controller 72xx.


the client have radius sarver but don't have AD and clear pass


can i get step by step tu configure conttler to connected with radius server.


i'm search many tutorial. i'm not success configure this device.



Ratih Apsari

Re: How To Cunfigure Aruba with Radius server only

Hey, which version are you using? If you wish to configured the RADIUS server on the controller you will need to follow the below:




Once you have the auth server configured, you will need to add it to a Server Group, add the Server Group into a AAA Profile then add the AAA Profile into a Virtual AP profile.

All of the above steps can be found in the online help link above.


If my post addresses your query, give kudos:)
Occasional Contributor II

Re: How To Cunfigure Aruba with Radius server only

can i get configure aruba without AD and Clearpass. 

my client haven't AD just radius

Guru Elite

Re: How To Cunfigure Aruba with Radius server only

If you are using 802.1x, you should use the WLAN Wlzard.  It will ask you for the radius server, ip address and server preshared key.


Configuration> Wizards> Campus WLAN.

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: