Wireless Access

Reply
New Contributor

How can I change the default AP group new AP's needs to join on an WLC?

On the 7205 controller I'd like to change the default AP group to a profile I created, so new AP's will automaticly join this group and start sending out the SSID's etc. Now they join the default group and I have to manually move them to the righ AP group.

Guru Elite

Re: How can I change the default AP group new AP's needs to join on an WLC?

There is only one default group. You'd have to add your VAPs / config to the
default group (although this is not recommended unless you're whitelisting
APs)

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor

Re: How can I change the default AP group new AP's needs to join on an WLC?

Ok, so correct me if I'm wrong, there's no way to change with new created AP group is the default group that new AP's will join. I've added an example where I want new AP's to join the Ap Group "RAAMWERK" by default.

Guru Elite

Re: How can I change the default AP group new AP's needs to join on an WLC?

There is no way to change that.  Correct.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: