Wireless Access

Reply
MVP
Posts: 340
Registered: ‎04-25-2013

How can i format my 7030 controller

hi all,

due to memory probleme i need to erase  my flash memory from the cpboot (i can't access to the to CLI Menu),  i found this methode in the knowledge base.

but when  i try it i got the following messaage

 

Error Message

 

any one can help me with this issue

 

Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
MVP
Posts: 992
Registered: ‎04-13-2009

Re: How can i format my 7030 controller

This should work:

 

1) boot the controller

2) wait for the first stage of the boot process  to complete (cpxload)

3) interrupt the second stage by pressing enter when prompted

4) enter the format 0:2 command

5) wait a very long time for this to complete.

6) reload the controller and preboot checks will rewrite data to the config partition allowing you to start the config wizard from CLI

 

If not contact TAC.:)

 

Cheers

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
Showing results for 
Search instead for 
Did you mean: