Wireless Access

Reply
Contributor I

How did an AP find the controller

Is there an easy way to check how a campus AP that has not yet been provisioned, but is ready for provisioning on the master controller found its way to the master controller between DHCP option 43, DNS and ADP? The AP is separated across a layer 3 domain from the master controller.

Re: How did an AP find the controller

Easiest place is to watch the AP boot up on the console.

Jerrod Howard
Sr. Technical Marketing Engineer
Contributor I

Re: How did an AP find the controller

The AP is in a remote office which makes it difficult. There must be a way to find this information remotely?

Guru Elite

Re: How did an AP find the controller

(Aruba7210-US) #       show ap debug system-status ap-name <name of ap> | begin "Master discovered"
Master discovered by:ADP

Boot Version
------------
1.4.0.6 (38177)
---------------

Power Status
------------
Operational State          POE-AT: No restrictions
-----------------          -----------------------
Current HW State           POE-AT: No restrictions
LLDP Negotiated POE Power  0.0W


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I

Re: How did an AP find the controller

Thanks Colin it works a treat. Just a quick observation for anyone else wanting to use this in a Master/Local environment - the command worked me on the Local controller only.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: