Wireless Access

Reply
Contributor I
Posts: 79
Registered: ‎04-09-2014

How to Add a new VRRP WLC?

I have a 7210 Controller with all licenses loaded. I wanted to add standby controller using VRRP, I had pre-configured VRRP settings on primary and all my APs are pointing to the VIP. I have some doubts about Licensing, because I found in my research that is needed to enable Centralized licensing server:

 

I want to be sure which specific settings on the standby controller will I need in order to complete this setup, and also to clarify licensing.

Aruba Employee
Posts: 148
Registered: ‎11-25-2009

Re: How to Add a new VRRP WLC?

I think its dup of 

http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/how-to-add-a-standby-vrrp-controller-into-an-existing-operative/m-p/252155

 

please close this thread. 

Vinod Kumaar AVM ACMX, ACDX
Principal Network Engineer
Customer Advocacy | Aruba Networks Inc.

Did something you read in the Community solve a problem for you? If so, click "Accept as Solution" in the bottom right hand corner of the post.
Search Airheads
Showing results for 
Search instead for 
Did you mean: