Wireless Access

last person joined: 20 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

This thread has been viewed 27 times

  • 1.  How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

    Posted Aug 17, 2016 07:13 AM

    Hi

    I need to erase  the memory from CPBOOT and uplaod a new arubaOS

    my controller is 7030

    Regards



  • 2.  RE: How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

    EMPLOYEE


  • 3.  RE: How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

    Posted Aug 17, 2016 09:20 AM

    thank you Tim

    but how can i erase the Flash memory ?

    Regards

     



  • 4.  RE: How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

    Posted Apr 07, 2017 09:55 AM

    I have a 4302 controller.
    I can not upgrade at all.

    By "cpboot" mode I can not ping the gateway.
    In the "uartb" mode I make the command "" ifconfig eth0 -addr = 10.24.10.200 -mask = 255.255.255.0 "" ping ok, but when upgrading occore below:

    Npboot> ping 10.24.10.210
    10.24.10.210 (10.24.10.210) is alive
    10.24.10.210 (10.24.10.210): 1 packets sent, 1 received
    *** command status = 0
    Npboot>
    Npboot> load -tftp 10.24.10.210:OAW4302_5.0.4.7_34135
    Loader: raw Filesys: tftp Dev: eth0 File: 10.24.10.210: OAW4302_5.0.4.7_34135 Options: (null)
    Loading:
    ........... 262144 bytes read
    Entry at 0x0000000020000000
    *** command status = 0
    Npboot>
    Npboot>

    The firmware does not go through completely.