Wireless Access

Reply

How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

Hi

I need to erase  the memory from CPBOOT and uplaod a new arubaOS

my controller is 7030

Regards

Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
Guru Elite

Re: How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

Re: How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

thank you Tim

but how can i erase the Flash memory ?

Regards

 

Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
New Contributor

Re: How to Erase Memory from CPBOOT and UPLOAD new ArubaOS

I have a 4302 controller.
I can not upgrade at all.

By "cpboot" mode I can not ping the gateway.
In the "uartb" mode I make the command "" ifconfig eth0 -addr = 10.24.10.200 -mask = 255.255.255.0 "" ping ok, but when upgrading occore below:

Npboot> ping 10.24.10.210
10.24.10.210 (10.24.10.210) is alive
10.24.10.210 (10.24.10.210): 1 packets sent, 1 received
*** command status = 0
Npboot>
Npboot> load -tftp 10.24.10.210:OAW4302_5.0.4.7_34135
Loader: raw Filesys: tftp Dev: eth0 File: 10.24.10.210: OAW4302_5.0.4.7_34135 Options: (null)
Loading:
........... 262144 bytes read
Entry at 0x0000000020000000
*** command status = 0
Npboot>
Npboot>

The firmware does not go through completely.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: