Wireless Access

Reply
New Contributor
Posts: 4
Registered: ‎01-04-2012

How to Set the name replace IP

[ Edited ]

Aruba conroller 620 , OS version 6.1.2.7

 

Can I add  a name replace IP or Mac Address??

Guru Elite
Posts: 21,027
Registered: ‎03-29-2007

Re: How to Set the name replace IP

Oh_hab,

Do you mean in the user table? The only way you can do that is if you authenticate against active directory or ldap


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I
Posts: 30
Registered: ‎01-04-2012

Re: How to Set the name replace IP

Unless your speaking of provisioning an AP?

 

That's under the configuration section, then AP Installation.

 

You should be able to change the Name of the AP, and assign it a static IP if you want.

Retired Employee
Posts: 234
Registered: ‎04-19-2011

Re: How to Set the name replace IP

You can use netdestination to map names to an IP addres 

 

(Aruba651) (config) #netdestination ?
STRING Name of destination host or subnet

(Aruba651) (config) #netdestination server
(Aruba651) (config-dest) #host 1.1.1.1

(Aruba651) (config-dest) #exit

(Aruba651) (config) #show netdestination server

server
------
Position Type IP addr Mask-Len/Range
-------- ---- ------- --------------
1 host 1.1.1.1 32

 

You can use this name in an ACL instead of the IP address 

 

For example: 

user alias "server" any permit 

 

--
HT
Search Airheads
Showing results for 
Search instead for 
Did you mean: