Wireless Access

Reply
Contributor I

How to activate IAP-275 once it's moved to a controller

I converted an IAP-275 from and instant AP to a mobility controller with all of my other APs (225s).  Now that I have it in the controller, it is flagged with 2I and I cannont seem to get the radios enabled on it.

 

Doc1.png

Guru Elite

Re: How to activate IAP-275 once it's moved to a controller

On the commandline of the controller, type "show log system 50" to see if you can get a clue why the AP would not come up.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Contributor I

Re: How to activate IAP-275 once it's moved to a controller

I am unable to get it to respond to ssh now that it is on the controller.

Guru Elite

Re: How to activate IAP-275 once it's moved to a controller

You should SSH into the controller to get that log..

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Contributor I

Re: How to activate IAP-275 once it's moved to a controller

ok here is what it shows but I am not sure what it means

 

ssh to controller.png

Guru Elite

Re: How to activate IAP-275 once it's moved to a controller

Is there a firewall between that AP and the controller?

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Contributor I

Re: How to activate IAP-275 once it's moved to a controller

No it is not.

Contributor I

Re: How to activate IAP-275 once it's moved to a controller

and i verified it is not a licensing issue.

Guru Elite

Re: How to activate IAP-275 once it's moved to a controller

Is it in the same ap-group as other access points?

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Contributor I

Re: How to activate IAP-275 once it's moved to a controller

Yes it is but they are models AP-225.  This one is a AP-275.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: