Wireless Access

Reply
Occasional Contributor II
Posts: 32
Registered: ‎01-27-2014

How to bring up the RAP3 ?

Hi, 

 

In order to bring up the RAP 3 what are all the configuration needed on the controller? I have configured the RAP3 mac-address on the Remote AP whitelist, created a VPN pool, given IKE shared secret. Apart from this do we need any other configuration on the controller? Please share us any document or screenshot on how to provision the RAP3 from the controllers point of view? 

 

Currently the RAP3 comes up on the controller for 2 minutes and then goes away. 

MVP
Posts: 4,272
Registered: ‎07-20-2011

Re: How to bring up the RAP3 ?

[ Edited ]
Make sure you have AOS 6.2 and up

Configured IP local pool
Configure the ap-group with the VAP(s) and with controller lms IP the rap can reach
Make sure you have necessary licenses
Add the MAC address of the rap in the rap whitelist
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Guru Elite
Posts: 21,037
Registered: ‎03-29-2007

Re: How to bring up the RAP3 ?


prasad405@gmail.com wrote:

Hi, 

 

In order to bring up the RAP 3 what are all the configuration needed on the controller? I have configured the RAP3 mac-address on the Remote AP whitelist, created a VPN pool, given IKE shared secret. Apart from this do we need any other configuration on the controller? Please share us any document or screenshot on how to provision the RAP3 from the controllers point of view? 

 

Currently the RAP3 comes up on the controller for 2 minutes and then goes away. 


If it comes up for two minutes, make sure you do not have an lms-ip configured in the ap system profile

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: