11-17-2015 02:12 AM
If you are looking to see how to see RSSI for particular device, as seen by the AP then you can run the following command:
show wms client list | include <DEVICE MAC ADDRESS>
Also another way you can sort determine the signal is by looking at the SNR value
Using this command you can see the SNR value
You can also get the SNR value from the Dashboard using the controller GUI
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
11-17-2015 06:31 PM
Thank you. your post is very helpful.
And I heard about 802.11k that the client should send its information to AP include signal,SNR and all of SSID it can hear.
Use "show ap association", you can find out the devices which have that capacity showed with a K flag.
So if I want to check that infomation sent by devices, is there a command for it ?
11-17-2015 06:44 PM
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base