Wireless Access

Reply
New Contributor
Posts: 4
Registered: ‎02-21-2011

How to configure LACP on AP225 in a Fast failover environment

Hi All,

 

We have a deployment where we are trying to setup LACP on the dual ports of an AP225.

 

We are wondering where to setup the Link Agg as it seems that both the ports are up on the AP but the port channel is showing as N/A when we believe to have configuired this under 

 

Configuration-> all Profiles -> AP -> AP LACP LMS map information 

 

I am just unsure of exactly the configuration to make the port channel live. 

 

The controller environment is setup as 

 

2 controllers in active/Standby with 2 local controllers connecting to the VIP of the VRRP and using Fast Failover,

 

Thanks

 

Sean 

Guru Elite
Posts: 8,759
Registered: ‎09-08-2010

Re: How to configure LACP on AP225 in a Fast failover environment

After you configure the LACP map, no other configuration is necessary. Is your upstream switch configured for LACP?


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: