Wireless Access

Reply
Occasional Contributor II
Posts: 27
Registered: ‎02-05-2017

How to configure multiple SSID for the single AP

I have OAW controller and have SSID already created for the list of AP's and now  i need to create seperate SSID for that list of AP's because in my setup there is a touch panel device where they have to connect to the SSID which im going to create and from touch panel through WIFI signal i have to control the other device

 

 

Can any one tell me how to do

 

OAW(1/1/13)(10.0.0.245)----------L3 switch(1/1/8)------L2 switch(1/49)------TOUCH PANEL(192.168.1.1)

 

If the above is the scenario then will i need to put all things in same vlan also vap profile also need to put the same vlan both controller & touch panel all are in different subnet thrn how touch panel connected with L2 switch will able to communicate with WIFI to control the device like TV,

 

 

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: