Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How to create Link Aggregation on S1500?

This thread has been viewed 0 times

  • 1.  How to create Link Aggregation on S1500?

    Posted May 13, 2015 01:12 AM

    I have a server with 2 port network card. I would like to configure link aggregation on S1500 to have both ports on server to connect to S1500. Please advise how to configure link aggregation using web GUI.



  • 2.  RE: How to create Link Aggregation on S1500?

    Posted May 13, 2015 02:53 AM
      |   view attached

     

    Upon login to S1500 UI, click on

     'Configuration'  ==>  'Ports' ==> 'Port-Channel'

     

    Two types of port-channel can be created

    1) Static

    2) LACP (dynamic)

     

     Add the target/connected gigabitethernet interfaces to the port-channel 'group'

     

    See the attached screen shots for reference:

     



  • 3.  RE: How to create Link Aggregation on S1500?

    Posted May 13, 2015 02:56 AM

    how to create port-channel on Mobility Access Switch using UI.jpg

     

    When you click on 'type', another window pops-up as below:

    how to create port-channel on Mobility Access Switch using UI_.jpg



  • 4.  RE: How to create Link Aggregation on S1500?

    Posted May 13, 2015 03:36 AM

    What if I would like to apply VLAN onto the LACP group?

    Is it possible?



  • 5.  RE: How to create Link Aggregation on S1500?

    Posted May 13, 2015 06:57 AM

    Yes,

     

    VLAN application on ports is done using 'switching-profile'

    Create a new 'switching-profile' or use existing and then associate it to target port-channel

    See below:

    Applying switchin profile to Port-channel interface.jpg