Wireless Access

Hi Guys,

I'm doing some POC of testing 6.3.0.0 , With two 135 units.

Is there any config tips on how to enable clientmatch feature? What is the best configuration for it - please advise.

 

Thanks.

 

Me

#AP135

 

You need AOS 6.3.x.x

You think so :)

 

i know that - it was a mistype. (in the above post - i fixed it)

vfabian - i have 620 with 6.3.0.0 with two,Is there any config tips on how to enable clientmatch feature? What is the best configuration for it - please advise. AP135 units...

 

Pretty straight forward to config and the most important thing are the show commands that woud allow you see that Client Match is working 

 

10x

 

 

Could also use the debugging to see in more detail what's going

 

(controller) (config) #logging level debugging arm-user-debug <devicemac>

 

 

Hi,

 

and howto remove a client (false) marked "unsteerable" ?

 

Thanks.

Client Match                                                                      Enabled

Client Match report interval (sec)                                  30

Client Match Unsteerable Client Ageout (min)           2880          <--------- Edit this value to desired for age-out of unsteerable entries

Client Match Sticky Client Check Interval (sec)           3

Client Match Sticky client check SNR (dB)                   25

Client Match SNR threshold(dB)                                   10

Client Match Sticky Min Signal                                        70

Client Match Restriction timeout (sec)                          20

Client Match Load Balancing threshold (%)                20

Client Match VBR Stale Entry Age (sec)                       120

Client Match Max steer failures                                      5

Client Match Load Balancing client threshold            10

Client Match Load Balancing SNR threshold (dB)     30

good tips

Was this moved in 6.3.0.2?

Where are those  numbers cannot find them in the GUI :(

What are the commands you used to see this? what are some of the commands to edit these values?

Client Match report interval (sec)                                  30

Client Match Unsteerable Client Ageout (min)           2880          <--------- Edit this value to desired for age-out of unsteerable entries

Client Match Sticky Client Check Interval (sec)           3

Client Match Sticky client check SNR (dB)                   25

Client Match SNR threshold(dB)                                   10

Client Match Sticky Min Signal                                        70

Anyone? :smileysurprised: