Wireless Access

Reply
DHD
Occasional Contributor I

How to get firmware for non-instant AP (AP-207)?

I have a mixed lot of IAP and AP (205, 207, 225, 325...).

 

Sadly, I just accidentally flash an instant firmware into a non-instant AP-207 via apboot upgrade by comand: 

apboot>upgrade os 1 <image name>

After that, my AP stuck in boot loop.

 

I tried reset several times but no luck. I wonder that it will be recovered if manual reflash with corrected firmware. But I can not found firmware for non-instant AP.

 

Any help would be greatly appreciated!

 

 

 

Re: How to get firmware for non-instant AP (AP-207)?

Check this post on how to load the AP firmware from the controller again.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
DHD
Occasional Contributor I

Re: How to get firmware for non-instant AP (AP-207)?

Thank you for your help, Herman Robers!

 

I've tried several times but no luck :(

 

P.s I running a VC on IAP-205, firmware 6.5.4.7, IP 10.10.10.14.

 

eth0 up: 1 Gb/s full duplexri
DHCP broadcast 1
DHCP IP address: 10.10.10.16
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 10.10.10.1
DHCP DNS server: 8.8.8.8
DHCP DNS domain: XXXXXXXXXX
Using eth0 device
TFTP from server 10.10.10.14; our IP address is 10.10.10.16
Filename 'armv7ns/ari'.
Load address: 0x4100000
Loading: T T T T T T T T T T
Retry count exceeded; starting again

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: